Andis CLC-5 Manual De Instrucciones página 6

FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance you
know is working).
2. Check to make sure adapter cord plug is plugged firmly into clipper. If failure to
charge still exists, return clipper to Andis or an Andis authorized service station for
examination and repair or replacement.
CORDLESS OPERATION
When the clipper is running in cordless operation, the remaining usable battery
will be displayed in a percentage (Figure A).
USE WITH ADAPTER CORD
If the clipper powers off in the middle of a clipping job, the adapter cord can be
attached to continue use in corded operation. When the clipper is running with
the adapter cord attached, the red charging plug icon will remain on.
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs made for
your Andis clipper. The combs mount easily; slide the cutter blade teeth into the back of
the comb until it snaps into place (Figure B). To remove, simply slide the comb forward
off the clipper blade. These attachment combs guide hair into the blades and give you
precise control of hair lengths. The length of trim is indicated on the attachment comb.
Different blade angles in relation to the skin, as well as thickness and texture of the hair
will vary the cutting length.
CLIPPER BLADE ADJUSTMENT
Your Andis adjustable clipper blade set is easy to adjust. For shorter cuts, use thumb on
shift key to slide button up to your desired length setting (Figure A). To change back to
longer cut lengths, press thumb on red length setting button and slide down to desired
length.
USER MAINTENANCE
The internal mechanism of your clipper motor has been permanently lubricated by the
factory. Other than the recommended maintenance described in this manual, no other
maintenance should be performed, except by Andis Company, or an Andis authorized
service station. To contact Andis directly, please call our Customer Support Team
at 1-800-558-9441 or email us at info@andisco.com.
6