Publicidad
To stop (exit) Cruise Control (CCS), you may choose one of the three
EN
ways:
◾
Depress the accelerator pedal all the way and keep depressing.
The CCS function will stop and the tractor will continue driving.
◾
Slightly depress the accelerator pedal and then release it. The
tractor and the CCS function will stop.
◾
Press the CCS button. The tractor and the CCS function will stop.
NOTE: When the CCS is stopped, the "
the LCD screen and beep will sound twice.
NOTE: If the parking-brake pedal is depressed, the tractor will stop but
the "
" icon will blink on the LCD screen to indicate the CCS is on
standby. In this case, release the parking-brake pedal, press the CCS
button. The tractor will resume driving automatically and the "
icon will stop blinking.
TURNING BLADES ON WHILE DRIVING IN REVERSE
NOTICE: Mowing in reverse is not recommended.
WARNING: Use extreme caution when mowing in reverse. Always
make sure no individuals come into the work area, especially small
children before and while mowing in reverse.
WARNING: The visibility of the operators could be impaired when
operating the tractor attached with the bagger kit. Extreme caution
and familiarity with the surroundings should always be taken into
consideration before and while mowing in reverse.
To Activate (Enter) MOWING IN REVERSE (E23)
To Stop (Exit) MOWING IN REVERSE, you may choose one of the four
ways:
◾
Press the MOWING IN REVERSE button once.
◾
Raise yourself off the tractor seat.
◾
Press the start/stop button for 3s to turn off the LCD screen.
◾
Remove the safety key or remove the battery pack(s) to shut
down the tractor.
NOTE: When the MOWING IN REVERSE is stopped, the "
illuminate on the LCD screen.
EMPTYING THE GRASS BAGGER (Fig. E24)
NOTE: When the "
" icon blinks on the LCD screen, the grass
bagger is full. After the bagger is emptied, the "
disappear from the LCD screen.
NOTE: The grass bagger should be replaced properly onto the tractor,
otherwise, the tractor can be driven but the blade motors cannot be
turned on.
MAINTENANCE
WARNING: Always wear eye protection with side shields. Failure
to do so could result in objects being thrown into your eyes resulting in
possible serious injury.
22
ELECTRIC LAWN TRACTOR — TR3800E-B
wrapping the cutting edges with rags or other materials when performing
any maintenance on the tractor blade. Always remove the safety key and
battery packs when servicing or transporting the tractor.
RECOMMENDED MAINTENANCE SCHEDULE(S)
Maintenance
Service Interval
" icon will disappear from
"
Before each use or
daily
After each use
Every 25h
Every 100h
Every 200h
" icon will
Every half a year
" icon will
Before storage
Annually
WARNING: Always protect your hands by wearing heavy gloves or
Maintenance Procedure
◾
Check the safety-interlock system.
◾
Visually check the tires whether they are
inflated.
◾
Inspect the blades.
◾
Inspect the entire product for damaged,
missing, or loose parts such as side
discharge chute, screws, nuts, bolts, caps,
etc., ensuring that all guards are in place
and working properly.
◾
Check and make sure the accelerator pedal
could be depressed and release properly.
◾
Check the steering wheel damper. The
steering wheel should be rotated with certain
resistance.
◾
Clean the tractor and wash the deck.
◾
Check the tire pressure.
◾
Check the rear wheels, ensuring that all
lug nuts are fastened at the recommended
torque (101-103 Nm).
◾
Check the front wheels, ensuring that the
nut is fastened at the recommended torque
(90-92 Nm).
◾
Check the front wheels, ensuring that they
turn freely.
◾
Check the parking-brake pedal. Remove
the battery from the tractor, then pull up the
parking-brake lock lever and depress the
parking-brake pedal to set the parking-brake.
Manually push the tractor forward to see if the
tractor can be moved without the rear wheels
rotating. If the tractor moves and the rear
wheels rotate meanwhile, please contact EGO
customer service center for repair.
◾
Remove the batteries from the tractor.
◾
Remove the safety key from the tractor.
◾
Perform all maintenance procedures listed
above and thoroughly clean the tractor.
◾
Inspect the entire product for damaged,
missing, or loose parts, replace or tighten the
corresponding ones before storage.
◾
Lubricate the shaft sleeves of the front wheels.
Publicidad
