Publicidad
GENERAL MAINTENANCE
Emptying the grass (Fig. F1 – F3)
Cleaning the tractor housing (Fig. F4).
Using wash port to clean tractor deck (Fig. F5 – F6)
F5-1
Wash Port
F5-3
Garden Hose
NOTICE: When finishing cleaning, turn off the tractor completely and
then remove the garden hose and quick-coupler.
MAINTAINING THE TRACTOR DECK AND THE CUTTING
BLADES
Preparation (Fig. G1)
Removing the deck (Fig. G2 – G3)
G2-1
Motor Cable
G2-3
Suspension Linkage
Replacing the cutting blades (Fig. G4 – G6)
G4-1
Stabilizer
G5-2
Washer
G5-4
Flange
Leveling the deck
a. When to level (Fig. G7 / Fig. G8 / Fig. G9)
b. Before leveling
◾
Checking the cold tire pressure (Fig. G10)
◾
Check the cutting blades. Remove and replace worn, cracked,
and/or bent blades as necessary.
c. Preparation for leveling (Fig. G11)
d. How to level
◾
To make side-to-side adjustment (Fig. G12)
◾
To make front-to-rear adjustment (Fig. G13)
STORAGE AND TRANSPORT
TRANSPORTING THE TRACTOR (Fig. H1 – H5)
H2-1
Ramps
NOTICE: Secure the tractor as needed, using straps or cables to prevent
movement during transport.
F5-2
Wash-Port Quick Coupler
G2-2
Cotter Pin
G5-1
Bolt
G5-3
Blade
G5-5
Motor Shaft
H2-2
Straps
STORAGE (Fig. I1 – I2)
NOTICE: Remove and store the battery pack(s) separately refer to the
corresponding manuals.
Clean and check the tractor before storage refer to the sections
"GENERAL MAINTENANCE" and "RECOMMENDED MAINTENANCE
SCHEDULE(S)".
Protecting the environment
WEEE (Waste Electrical and Electronic Equipment) Do not
dispose of electrical equipment, used battery and charger
into household waste! Take this product to an authorized
recycler and make it available for separate collection.
Electric tools must be returned to an environmentally
compatible recycling facility.
ELECTRIC LAWN TRACTOR — TR3800E-B
EN
23
Publicidad
