Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
12. Attaching the top panel
• Locate the Top Panel (G) and align the pre-in-
stalled screws on the edges of the main assembly
with the screw holes on the Top Panel (G).
• After inserting the screws into the holes, tighten
the fasteners from underneath the Top Panel (G)
using a Phillips Screwdriver as shown.
13. Securing the back panels
• Place the Back Panel Brackets (KK) between
the back panels and the grooves of the
assembly as shown.
• Fasten each Back Panel Bracket (KK) using
Screws (JJ). Repeat until all brackets are in
place as indicated by the diagram.
Ø3x16mm
JJ
Screw
Back Panel
KK
Bracket
14. Securing the surround brackets
• Find the pre-attached metal plate bracket on
the front rail of the Fixed Shelf (B). Rotate the
bracket to span the joint of the Fixed Shelf (B)
and the outer side panel.
• Secure the surround bracket with a Screw
(HH).
• Repeat to secure both sides.
Hardware Used
Ø3x12mm
HH
Screw
23MMP35115REV1.0
x8
x 2
13
12
G
13
14
Publicidad
