Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
18. Assembling the log set
• Route the wires of the Logset Left (EC) and the
Logset Right (ED) down the back of the Ember
Bed (EG) and into the receiving tabs to secure in
place. Refer to the lower diagram.
• Gently plug the cords from both the Logset Left
(EC) and the Logset Right (ED) into the ports as
shown. Ensure the cords are plugged in straight.
19. Assembling the fireplace
• Place the assembled log set into the back of the
unit behind the glass panel.
• Push the tabs beneath the log set into the holes
on the bottom panel.
20. Securing the log set
• Once the log set is in place, secure with Screws
(EE) through the bottom of the log set and into the
base.
Hardware Used
Ø3.5x12mm
EE
Screw
23MMP35115REV1.0
x 2
15
18
EC
ED
19
20
EG
EG
Publicidad
