Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
15. Attaching the insert brackets
• Locate the L Brackets (EF) and secure to each
side of the Heater Box (EB) using Bolts (II).
Hardware Used
Ø4x12mm
II
Bolt
16. Installing the fireplace heater
• Rest the brackets of the Heater Box (EB) on the
previously installed mounting bolts from step 2.
• Secure the heater in place by screwing Bolts
(DD) through the other side of the brackets on
the Heater Box (EB) and into the Fixed Shelf (B)
above.
Hardware Used
Ø6.3x12mm
DD
Bolt
17. Assembling the log set
• Place the Logset Left (EC) into the Ember Bed
(EG) as shown. Repeat with the Logset Right
(ED).
23MMP35115REV1.0
x4
x 2
14
15
EF
16
17
ED
EF
EB
EB
EC
EG
Publicidad
