Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. To protect the product from possible scratches, please
assemble the parts on a scratch-free surface.
Estimated Assembly Time: 45-60 minutes
Tools Required for Assembly (not included): Phillips screwdriver, scissors and utility knife.
ASSEMBLY INSTRUCTIONS
1. Installing the USB port
• Slide the USB output (AA) through the
opening in the Fixed Shelf (B).
• Gently secure the USB output (AA) in place
using Screws (BB) and a Phillips screwdriver.
Note: USB to AC adapter is not included.
Hardware Used
USB output
AA
980#
Ø3x12mm
BB
Screw
2. Installing the Screw
• Installing the Screw (DD) on the Fixed Shelf (B). Do
not tighten all the way. Leave each bolt head about
1/8'' out from the shelf.
Hardware Used
Ø6.3x12mm
DD
Bolt
23MMP35115REV1.0
x 1
x 2
x 2
9
1
2
B
B
Publicidad
