Orbegozo ADR 71 Manual De Instrucciones página 24

ADR 71 ADR 94 ADR 97
scheduled power off or on up to a maximum of 24 hours.
Scheduled start/shutdown setting method:
Start/shutdown status:
1- Press the "Timer" key to activate the function or view the timer status, the "Timer" indicator icon
will flash.
2- Press the "+" or "-" keys to adjust the set time with an interval of 1 hour.
3- If no operation is performed or any other key except " + " and " - " is pressed within 5 seconds
during the "Timer" indicator flashing, the displayed value will be automatically confirmed.
3. SLEEP FUNCTION
When the device is in sleep mode, the air speed automatically changes to low. In this mode all the lights
turn off except the "Sleep" indicator which remains slightly lit. In sleep mode, press the Sleep key to stop it.
4. MEMORY FUNCTION
This device has non-volatile memory.
- If you start the equipment and a power failure occurs, it will turn on after being reconnected and will
continue to operate with the previous parameters.
- If the equipment is turned off before a sudden power outage, when the power returns it will remain off.
5. FULL TANK REMINDER
When the internal tank of the device is full of water, the "Full" icon flashes and the display shows E7,
indicating to the user that the water tank of the device is full. At this time, the customer must turn off the
equipment, drain the water and restart so that the equipment can restore normal operation.
Do not install or use the portable air conditioner in the bathroom or other humid environments.
INSTALL THE AIR OUTLET TUBE ASSEMBLY
1) Take out the outer connector and air outlet tube and remove the plastic bags
2) Insert the screw into the hole of window partition A.
3) Insert the window partition B into the window partition A from the side (the wing screw head
needs to be stuck into the slot of the window partition B), and adjust the assembly length as required
INSTALLATION
24