Descargar Imprimir esta página

Cameo PIXBAR G2 Manual De Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 94
High volumes of radio traffic (e.g. powerful wireless LAN networks)
Interference
Electromagnetic radiation (e.g. LED video screens, dimmers)
All range specifications refer to free-field line-of-sight applications without interfer-
ence!
The operation of radio transmission systems is subject to official regulations. These
may vary from region to region and must be checked by the operator before use (e.g.
radio frequency and transmission power).
WARNING: Devices with wireless signal transmission are not suitable for use in sen-
sitive areas in which radio operation can lead to potentially detrimental interactions.
These include e.g.:
• Hospitals, health centres or other healthcare facilities that provide patient treatment
with skilled personnel and equipment.
• Hazardous areas Class I, II and III
• Restricted areas
• Military facilities
• Aircraft or vehicles
• Areas where the use of mobile phones is prohibited
TRANSMISSION VIA W-DMX
WARNING: In general, wireless DMX transmission must not be used for applications
involving safety-related factors that might result in personal injury or property dama-
ge in the event of a failure.
This applies in particular to moving scene or truss structures, DMX-controlled motors/
lifts or lifting devices for operating DMX-operated platform lifts, hydraulic systems or
comparable moving components.
Furthermore, wireless DMX transmission must not be used to control flame or pyro-
technic devices, explosion-driven effects, or gas or liquid effects. These include e.g.
CO2 cannons, confetti shooters, water effects or similar.
NOTES ON PORTABLE OUTDOOR DEVICES
1. Temporary operation! Event equipment is generally only designed for temporary
operation.
2. Continuous operation or permanent structural installation – particularly outdoors –
can impair the function, surfaces and seals and cause premature material fatigue.
3. Damage to the surface coating can impair the device's corrosion protection. Da-
maged surface coating (e.g. scratches) must be promptly repaired using suitable
measures.
10

Publicidad

loading

Este manual también es adecuado para:

Pixbar tw ip g2Clpbtwipg2