Publicidad
Idiomas disponibles
Idiomas disponibles
all sanding operations. The condition of the
surface to be sanded will determine which
grit will do the job.
If the surface is rough:
Start with coarse grit (sold separately) and
sand until the surface is uniform. Then
use medium to remove any scratches left by
the coarse grit. Then use finer grit (sold
separately) for finishing the surface.
NOTE: Always continue sanding with each
grit until the surface is uniform.
WORKING HINTS FOR
YOUR SANDER
1. Your sander is useful for working on wood,
metal, painted surface. It will smooth surfaces
prior to painting, even where fillers have been
used and left proud.
2. Your sander is best suited to large flat areas
such as doors but can also be used on skirting
boards, windows, etc, provided they are
accessible.
3. Different types of sanding paper will allow the
sander to meet various needs. Different
grades of sanding paper are available, the higher
grade number, the finer the grit. For rough
work start with a low grade of grit (i.e. 60 grade)
and change to a higher, finer grade (i.e.
100 or 120) for finishing. If you use a fine grade
for rough surfaces it will soon clog and need
changing.
4. At all times, let the sander do the work-do not
force it or apply excessive pressure to the
sanding paper or it could wrinkle or tear.
Preferably, use a light circular motion.
5. If the surface shows excessive making from
the abrasive motion, you may be using a grit
which is too coarse or applying too much
pressure.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
32
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
TROUBLESHOOTING
1. If your sander will not operate, check the
power at the mains plug.
2. If the sander does not abrade surface,
checking the sanding paper. If the sanding paper
have been
worn, replace the new paper and try again. The
paper must be kept in a dry place, if it is allowed
to become damp, the abrasive particles will lose
their adhesion to the backing paper and will not
abrade.
3. If the sander dose not move smoothly, The
sanding paper may be loose, damaged or
wrinkled.
Replace and try again.
4. If a fault can not be rectified return the sander
to an authorized dealer for repair.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 24
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1. Misuse, abuse or neglect.
Publicidad
