Descargar Imprimir esta página

Cameo AZOR W2 Manual De Usuario página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
6
IDMX STICK
Connection for the optional iDMX stick for W-DMX™ operation (insert the iDMX stick with the
antenna facing upwards). Note the wireless settings in the Settings menu.
7
AIR VENTS
To prevent damage to the device, do not cover the ventilation openings on the back and ensure
that air can circulate freely.
8
OLED DISPLAY
The OLED display shows the currently active operating mode (main screen), the menu items
and the numerical value or operational status of certain menu items. If no input is made within
approximately one minute, the display automatically returns to the main screen. Note on the main
screen in operating modes with external control: In the event that the control signal is interrupted,
the characters in the display begin flashing; once the control signal is present again, the flashing
stops.
9
CONTROL BUTTONS
MENU – Press MENU to access the main menu. Press again or repeatedly to return to the main
screen. Pressing MENU without confirming a value or status change by pressing ENTER restores
the previously confirmed value or status.
ENTER – Press ENTER to access the menu and submenus. ENTER is also used to confirm value or
status changes.
⏶ and ⏷ – Select menu items in the main menu (DMX address, DMX mode etc.) and in the sub-
menus. Allows you to change the value of a menu option, such as the DMX address (long press =
quick value change).
OPERATION
NOTES
Upon switching on the spotlight, the message "Update Wait" is displayed momentarily, followed
by "Welcome to Cameo", the model name and the software version. Thereafter, the motors are
reset (Motor Reset Please Wait). After this process, the spotlight is ready for operation and the
previously activated operating mode is launched.
12

Publicidad

loading

Este manual también es adecuado para:

Clazorw2