Cameo AZOR W2 Manual De Usuario página 16

SYSTEM SETTINGS (Settings)
Starting from the main screen, press MENU to enter the main menu. Use the ⏶ or ⏷ buttons to
select the menu item Settings and confirm with ENTER.
This takes you to the submenu (see table). Select submenu items with ⏶ or ⏷, confirm with
ENTER, change value or status with ⏶ or ⏷, confirm with ENTER).
(Bold print = factory setting)
Wireless
Settings (iDMX
stick optional)
Display
Settings
Dimmer
Settings
16
(Dim-
mer curve)
Wireless control deactivated
Wireless control activated
Signal -> DMX OUT
Backup via DMX IN in case of W-DMX
signal interruption
W-DMX reception only
Display rotation by 180° (e.g. for over-
head installation)
No display rotation
Permanently on
Deactivates after approximately 20
seconds of inactivity
Autolock function deactivated
Controls locked after approx. 60
seconds without input (LOCKED). To
unlock, press MENU for approx. 3
seconds.
Light intensity increases linearly with
DMX value
Light intensity can be finely adjusted
at lower DMX values and broadly
adjusted at higher DMX values
Light intensity can be broadly adjusted
at lower DMX values and finely adjust-
ed at higher DMX values