Cameo AZOR W2 Manual De Usuario página 13

MAIN SCREEN IN DMX OPERATING MODE
In DMX mode, the main screen shows the currently set DMX start address (see illustration). Flas-
hing characters indicate that no DMX signal is present.
SET DMX START ADDRESS (DMX Address)
Starting from the main screen, press MENU to enter the main menu. Now use ⏶ or ⏷ to select
the menu item DMX Address and confirm with ENTER. Use the ⏶ or ⏷ buttons to configure the
desired DMX start address and press ENTER to confirm (the highest possible value depends on
the selected DMX mode).
CONFIGURING DMX MODE (DMX MODE)
Starting from the main screen, press MENU to enter the main menu. Now use ⏶ or ⏷ to select
the menu item DMX Mode and confirm with ENTER. Select the desired DMX operating mode
using ⏶ or ⏷ and confirm with ENTER. Tables showing the channel assignment of the different
DMX modes can be found in the DMX CONTROL section of this user manual.
STAND-ALONE MENU
In the stand-alone operating modes (Play Scene and Play Loop), the control signal of the corres-
ponding mode can be output to slave units via XLR. If you do not want to output the control signal,
deactivate the output.
13