dirna Bergstrom TRP Dynamic Instrucciones De Montaje página 30

TRP Dynamic
EN
Connect power cabling in battery.
10
TAKE CARE WITH POLARITY.
Important: Due to the complex system of electronic regulation of the equipment, the current connection must
be made directly to the vehicle battery and not to any other point which services other accessories of the
vehicle, taking the precaution to not invert the polarity when making the connection (1). If polarity is inverted,
the control plate does not come on and the unit does not work.
Important: Check the User Manual before starting up.
Open the cabin and pass the cabling through
11
the most appropriate area towards the
capacitor, securing with clamps or flanges.
FUSE
-
+
30
Air conditioning for vehicles
10