Aiwa CA-DW535 Manual De Instrucciones página 6

DUBBING SPEED
1= ——.
—.—
— POWER/(!) STANDBY/TAPE,
RADIO/BAND, CD
REC PLAY REW
FF STOPIEJECTPAUSE PLAY REW FF $TOPIEJECT PAUSE
- ~~
Use Type I (normal) tapes only.
Press 9/4 STOP/EJECT to open the cassette holder
and insert a tape with the exposed side down and the
side to be played facing out.
T
Deck 1
Deck 2
@
wow=
Push the cassette holder to close.
Press > PLAY while the power is off.
The power is turned on and play of the inserted tape
begins.
During tape operation, the TAPE button lights up and the
volume level is displayed.
WA STOP/EJECT - Stops play. The power will be
automatically turned off.
II PAUSE – Pauses play. To resume play, press again.
- REW/~FF – Rewinds/fast forwards. To stop the
winding, press WA STOP/EJECT.
Continuous play
After play on deck 2 finishes, play on deck 1 will start
without interruption.
During play on deck 2, press II PAUSE then press ~
PLAY on deck 1.
II PAUSE on deck 1 will be released at the end of play on
deck 2.
7
2
3
Insert a tape to be recorded on into deck 1 with
the side to be recorded facing out.
Deck 1
(3
c1
wA
v
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press RADiO/
BAND and tune to a station.
Press REC on deck 1 to start recording.
- PLAY is pressed simultaneously.
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 3 of PROGRAMMED PLAY on page 4
to program tracks.
2 Press REC.
To stop recording, press 9/4 STOP/EJECT on deck 1.
When recording from a CD, play pauses. To stop CD play,
press STOP/MEMORY.
To pause recording, press II PAUSE, To resume
recording, press again.
To erase recording, press REC on deck 1 while the
power is off.
After recording, press POWER/(!) STANDBY to turn the
power off.
6
ENGLISH