Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAY
POWER
EQ
FUNCTION
Connect a microphone
with a mini plug to the MIC jack
and play a source to be mixed.
To record the microphone
mixing sound, insert a tape in
deck 1 and press
REC.
During dubbing at high speed, the microphone
mixing
sound is not recorded.
MIC VOL – Adjusts the microphone
volume. If a howling
sound is produced, turn the volume down.
To prevent howling, hold the microphone
away from the
speakers. The use of unidirectional
type microphones
is
also recommended.
Buttons on the remote control and the main unit with identical
indications
have the same functions.
To turn the power on
Press POWER to turn on the display.
When using the unit on the batteries, this button will not turn
the power on.
To turn the power off
Press POWER to turn off the display.
When one of the deck operation
buttons is pressed, this
button will not turn the power off.
To use the FUNCTION
button
Each time FUNCTION is pressed while the power is on, the
function is selected cyclically.
CD +
RADIO +
*TAPE –
1
* applicable
when one of the deck operation buttons is
pressed
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened
with mild detergent
solution. Do not use strong solvents such as alcohol,
benzine or thinner.
To clean the heads
When the tape heads are dirty;
- high frequency
sound is not emitted
- the sound is not adequately
high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on
After every 10 hours of use, clean the tape heads with a
head cleaning cassette.
Use separately
sold dry-type or wet-type cleaning
cassette.
Refer to the instructions
of the cleaning cassette for
details.
To clean the lens
Lens
Use a cotton swab slightly
moistened with cleaning fluid.
Wipe gently from the center to
the edge.
If an erroneous
display
or malfunction
occurs
Make sure that none of the deck operation
buttons is
pressed.
Press
while pressing POWER/(!) STANDBY.
If the unit cannot be reset in the way above, disconnect
the
AC cord and remove ail the batteries to turn off the display.
Leave the unit for a while and turn the power back on.
ENGLISH
9
Publicidad
