Aiwa CA-DW535 Manual De Instrucciones página 7

1
2
3
4
5
6
Press TAPE to turn the power off.
Insert a tape to be recorded on into deck 1 with
the side to be recorded facing out.
Insert a tape to be played into deck 2 with the
side to be played facing out.
Press 1I PAUSE then press REC on deck 1
to enter recording pause mode.
The power is turned on.
P PLAY is pressed simultaneously.
Press DUBBING SPEED to select a dubbing
speed.
The HIGH SPEED DUB indicator lights up: Dubs at high
speed.
The HIGH SPEED DUB indicator disappears: Dubs at
normal speed.
Press > PLAY on deck 2.
11 PAUSE
on deck 1 is released and recording starts.
To stop recording, press WA on deck 1 and deck 2. The
power will be automatically turned off.
NOTE
When recording near a television, noise may be recorded.
Move the unit away from the television.
To prevent accidental erasure, break off the plastic tabs on
the cassette tape with a screwdriver or other pointed tool
after recording.
To record on the tape again, cover the tab openings with
adhesive tape, etc.
Side A
e
.
"(Q *
N
Q>
d
Tab for side A
ENGLISH
7