Publicidad
Idiomas disponibles
Idiomas disponibles
12. Move the lower door and adjust its position to align lower hole site and upper hinge axis. Turn
the middle hinge by 180°. Change the washer on the axis to the upper side and adjust the middle
hinge to the appropriate position and then install it.
13. Screw out the upper hinge axis, turn the upper hinge over and fix axis on it. Then place it at side
for use.
14. Move the upper door to appropriate position, adjust part ② and upper door. Move the connecting
wire ③ in the slot of upper hinge(left), and install part ① onto the upper hinge, then fix part ②
by screws ④. Finally mount part ⑤. (Please hold upper door by hand when installing).
15. Connect electrical connector ① in accordance with step1.
16. Reverse part ① by 180° and install it onto the right comer of upper door, then mount part ②.
(Both of which are taken down in step 1).
Step 12
Step 15
Step 13
Step 14
Step 16
53
Publicidad
