Publicidad
Idiomas disponibles
Idiomas disponibles
9. FAVORITES
The Favourites feature stores the oven settings for your
favorite recipe.
The oven automatically recognizes the most used functions. After
a certain number of uses, you will be prompted to add the
function to your favorites.
HOW TO SAVE A FUNCTION
Once a function has finished, tapping on
as a favourite. This will enable you to use it quickly in the
future, keeping the same settings. The display allows you to
save the function by indicating up to 4 favorite meals time
including breakfast, lunch, snack and dinner.
• Tap the icons to select at least one.
• Tap "SAVE AS FAVORITE" to save the function.
ONCE SAVED
To view the favorite menu, press
divided by different meal times and some suggestions will
be offered.
• Tap the meals icon To view the relevant lists
• Scroll through the prompted list.
• Tap the recipe or function you require.
• Tap "START" to activate the cooking.
CHANGING THE SETTINGS
In the favorite screen, you can add an image or name to the
favorite to customize it to your preferences.
• Select the function you want to change.
• Tap "EDIT".
• Select the attribute you want to change.
• Tap "NEXT": The display will show the new attributes.
• Tap "SAVE" to confirm your changes.
In the favorite screen you can also delete functions you have
saved:
• Tap the
on the function.
• Tap "REMOVE IT".
You can also adjust the time when the various meals are
shown:
• Press
.
• Select
"Preferences".
• Select "Times and Dates".
• Tap "Your Meal Times".
• Scroll through the list and tap the relevant time.
• Tap the relevant meal to change it.
It will be possible to combine a time slot only with a meal.
10. TOOLS
Press
to open the "Tools" menu at any time. This menu
enables you to choose from several options and also change
the settings or preferences for your product or the display.
REMOTE ENABLE
To enable use of the 6
Sense Live Whirlpool app.
th
KITCHEN TIMER
This function can be activated either when using a cooking
function or alone for keeping time. Once started, the
timer will continue to count down independently without
to save it
: the functions will be
interfering with the function itself. Once the timer has been
activated, you can also select and activate a function.
The timer will continue counting down at the top-right corner of
the screen.
To retrieve or changhe the kitchen timer:
• Press
.
• Tap
.
An audible signal will sound and the display will indicate
once the timer has finished counting down the selected time.
• Tap "DISMISS" to cancel the timer or set a new timer
duration.
• Tap "SET NEW TIMER" to set the timer again.
LIGHT
To switch on or off the oven lamp.
SELF-CLEAN
Activate the "Self-Clean" function for optimum cleaning of
the internal surfaces.
It is reccommended to do not open the oven door during the
cleaning cycle to avoid a loss of water vapor that could get an
adverse effect on the final cleaning result.
• Remove all accessories from the oven before activating
the function.
• When the oven is cold, pour 200 ml of drinking water on
the bottom of the oven.
• Tap "START" to activate the cleaning function.
Once the cycle has been selected, you can delay the start of
automatic cleaning. Tap "DELAY" to set the end time as indicated
in the relevant section.
DRAIN
The drain function allows the water in the reservoir to be
drained. Regularly draining the reservoir is the best way to
prevent water stagnation, therefore it is strongly
recommended to regularly drain the reservoir after every
steam cycle. If the reservoir is not regularly drained, after a few
days since the last steam cycle the appliance will ask to do it:
this request can not be ignored, and it will be possible to
continue with the normal use of the product only after the
drain has been carried out.
panel to pause the drain process and to resume it (for example
in case the jug would be already full of water in the middle of
the draining process).
Please note: to ensure that the water is cold, it is not possible to
drain the reservoir before 4 hours have elapsed from the last
cycle (or the last time the product was powered). During this
waiting time, the display will show the following feedback
<Water is TOO HOT. Wait until the temperature decreases>.
Once selected the "Drain"
function or when requested from
display, start the function and
follow the actions indicated:
Open the door and place a large
jug (at least 2 liters capable)
under the drain nozzle located at
the bottom of the panel, to the
left of the inlet nozzle. If needed,
it is possible operate the control
EN
7
Publicidad
