Publicidad
Idiomas disponibles
Idiomas disponibles
1. Switch on the power of the machine and the machine enters standby state;
2. Prepare cooking oil and food;
3. Place the food basket on the lifting bar of the tank;
4. Plug in the power plug, press the corresponding menu button, and the machine will start heating.
5. Automated cooking:
Press the button
and the machine will work automatically. After the oil temperature is
heated to the set temperature, the machine will automatically lower the frying basket and start frying food.
When the heating reaches the set time, the machine will automatically raise the frying basket, and the
machine will have beeping alarm to indicate that the frying work has been completed.
Take the Fried food out of the frying basket and prepare to fry the next basket.
3.3 Set the energy-saving temperature, cooking temperature and time
1. Energy-saving temperature
A function designed to conserve energy; When not using for long time, to keep the oil temperature in low
temperature condition, the heat preservation temperature is 125 °C, and press the menu button, cooking
temperature can quickly return to the menu temperature. It can reduce the heating time of the next
cooking, thus shortening the cooking time of food and extending the service life of oil. The specific setting
method is as follows.
Press
and hold until right digital shows "PROG"; press
window will flash temperature value, press
130°C, press "PROG" to finish.
2. Cooking temperature and time
According to the types of food, operator needs to find a more appropriate value for cooking temperature
and time after many experiments. Generally, set temperature less than 190 ° C and time less than 10
minutes.
Press
and hold until right digital screen shows "PROG", press
screen shows "Ti 1", right screen shows cooking time of the first stage, press
cooking time, for example 4 mins. Press
temperature of the first cooking stage, press
Press
again, left screen shows "Ti2", right screen is the cooking time of the second stage, default is
00:00, repeat above steps.
Maximum is 3 stages, if don't need, can set time into 00:00. Press
and right shows the time value for the first basket shake, for example 2 minutes,
which means cooking after 2 mins, basket will lift up. Maximum is 2 basket shake. Press
setting, and press
to return back to standby mode.
3.4 Use and set up time increment key
1. Increment key function
Increase the cooking time by a certain proportion based on the pre-set working time as required. When
we set the time and temperature of each work menu, it is generally determined after many food
experiments and it is for one portion However sometimes we need to fry more than one portion of the
same kind of food, if according to that, it may affect the cooking quality of food ; In the default value of
the machine, when frying 2-3 portions of food, you can press the "increment" key 1, which can extend
10% of the time, and when frying 4-5 portions of food, you can press "increment" key 2, which can
extend 30% of the time.
2. Increment key sample:
Press menu key for auto cooking, before it is finished, you press
For example, a menu's cooking time is 8 mins., press increment key 1 will extend time by 10% which
means increasing 48 sec. after the original cooking time.
3. Increment key setting:
Follow 3.3-2 method to cooking time setting, when time value is flashing, press
percentage value, adjust it by using up and down key.
3.5 Use and setup of menu key 0
1.0 Menu key function
Temporary key, the need to often adjust the time and temperature of cooking by pressing this key.
Parameters adjusted by this key will not be stored.
2.0 Menu setting
At the standby mode, press
press
again, screen will show temperature, press up/down to adjust; press
will start cooking.
or
to adjust to your require temperature, such as
again, left digital screen shows "TE1", right screen show
or
to adjust temperature, for example 175°C.
, digital screen will flash time valve, press up/down to adjust;
, time/temperature
, left digital
or
to adjust the
again, left screen shows "SH1"
to finish
or
key can extend cooking time.
, it will shows
the third time, machine
10/15
NOTE:
The operation method of menu key Nº
2-9 is the same as that of menu key Nº 1.
NOTE:
Nº 2-9 menu is same way to set up as
menu 1.
NOTE:
1 -- 9 the delay percentage of each menu
can be set as needed, and the set value
will be recorded.
Publicidad
