Publicidad
Idiomas disponibles
Idiomas disponibles
There are two working modes:
1. Pr-1 mode:
Once menu key is pressed, frying basket immediately drops for cooking no matter what is the current oil
temperature in the tank. Oil has been preheated, the operator is more experienced in cooking. This
pattern is generally not recommended.
2. Pr-2 mode:
We have to wait until the oil temperature rises to the temperature we set before automatically lowering the
frying basket to start cooking. This mode is normally used, and it is also the default mode of our machine.
3. Switch between pr-1 and pr-2 modes
Press and hold
until right screen shows "PROG", press and hold
displays "Pr-1" or "Pr-2", then press and hold
example "Pr-2". Press
to exit programing, now working mode is set as Pr-2.
4. Cleaning And Service
WARNING:
Please follow these steps before cleaning or service this fryer:
· Turn off fryer and allow it to cool down
· Disconnect breaker or power supply
· Pour out oil and keep into another container
After finishing cleaning and service:
· Move it back safely
· Reconnect power line after cleaning
· Turn on the circuit breaker on the power supply for the fryer
· Power on unit as operation instruction
WARNING:
· Maintenance service and spare parts changing must be conducted by manufacturer authorized
service provider.
· Must make sure this unit is cool down before start cleaning. Do not use electric cleaning
equipment, steel wool or steel brush to clean stainless steel surface.
· Do not use corrosive cleanser in the tank which will deteriorate heating elements. Degreasing
cleanser and stainless steel polish are allowed to use for exterior.
4.1 Procedure: Cleaning Exterior
Cleaning products: detergent/cleanser for stainless steel. Tools: cleaning brush, cloth and paper towel
Step
Operation
1
Clean the exterior of this fryer
2
Wipe
3
Polish exterior
4.2 Program: descale oil tank
Cleanser: disincrustant. Tools: cleaning brush, dry cloth and paper towel
Step
Operation
1
Fill oil tank with water
2
Add in disincrustant
3
Drain water, clean oil tank
, screen
to switch to required working mode, for
Description
• When fryer is cool down, shut down fryer
according to operation instruction
• Use dry cloth to wipe exterior
• Dry surface
• Use paper towel to wipe
Description
• After the oil tank has cooled down, remove the
tank and pour the oil into another container. Then
fill the tank with an appropriate amount of water.
• Add in moderate disincrustant (each oil tank add
in 250 ML vinegar), soak for more than 30 minutes.
• Drain all disincrustant out and continually rinse
oil tank with water until no remaining disincrustant.
11/15
NOTE:
Advanced applications, general users do
not need to set!
NOTE:
Do not use water pipe or high pressure
steam for cleaning, excessive water over
maximum oil level will affect insulator with
damp. Must not use corrosive cleanser
which will damage unit's construction.
Publicidad
