Publicidad
Idiomas disponibles
Idiomas disponibles
en
12
Clamping a workpiece (figure 8).
To clamp a workpiece, use the supplied
crank rod or an open-end wrench.
Remove the supplied crank rod from the
vise and mount it through the bore at the
crank end. Clamp the workpiece.
7.
1.
2.
1.
3.
4.
5.
7.
6.
Or turn the crank using an open-end
wrench. Clamp the workpiece.
2.
1.
2.
Fig. 8
15 mm
Publicidad
