Cycle Selection Charts - Haier DWL2825 Manual Del Usuario

CYCLE SELECTION CHARTS

(For all models except DWL7075)
Select the wash cycle and options desired. The dishwasher starts filling once the
door is closed and you press a cycle, unless you select a delay wash. After fill-
ing, and a brief wash period, the machine will pause for a 5 minute energy sav-
ing soak interval. During this time, dried and baked on soil is softened for easier
removal later in the cycle. You can select options as the machine is filling.
(For model 7075)
Select wash cycle and options desired and push the start key. After closing the
door, the dishwasher will start filling, and after a brief wash period, the machine
will pause for a 5 minute energy saving soak interval. During this time, dried and
baked on soil is softened for easier removal later in the cycle. You can select
options as the machine is filling.
paused while the dishwasher heats water to desired temperature. Water usage is
shown in U.S. gallons/liters.
This model meets the ENERGY STAR® guidelines for energy efficiency.
Cycle times listed below are approximate only and will change with the selection
of additional options, size of load and incoming water temperature. Soil level
will also effect the cycle time of the AUTO and NORMAL cycles. Your dishwasher
may not have all of these cycles. See section below concerning STEAM option.
Use for all soil types and dish
loads. This cycle has additional
checks for soil in the water to give
added wash action time. The wash
action will pause several times
throughout the cycle, for up to 70
seconds, to check the soil level in
the wash water.
130F
(54C)
Cycle
Time
(min)
58* 4.7-7.8
17.8-29.5
Cycle
Time
(min)
133* 9.3 / 35.2
English
18