Optika Italy TB-6PRO4K Manual De Instrucciones página 10

6. Connect the power cord of the mini-PC. (Fig. 9)
8.4 Microscope assembly
1. Remove the protective cap from the camera and screw on
the C-mount. (Fig. 10)
2. Remove the protective cap ② from the third port of the obser-
vation head by loosening the fixing screw ① located on the
side of the third port. (Fig. 11)
3. Insert the dovetail of the C-mount into the third port, properly
align the whole system with respect to the microscope, and
then tighten the fixing screw ①. (Fig. 12)
①
Page 10
F ig. 9 F ig. 9
F ig. 10 F ig. 10
②
①
F ig. 11 F ig. 11
F ig. 12 F ig. 12