Ferroli RIMINI DP Serie Instrucciones De Instalación, Uso Y Mantenimiento página 55

RIMINI DP
The thermal emitter must be fixed to the wall using the adjustable brackets, screws and wall
plugs supplied with the emitter, according to the instructions on the template printed on the box.
If you do not have this cardboard template, you can follow the following instructions:
1. Mark the position of the lower hole of the brackets on the wall.
Model
RIMINI DP 500
RIMINI DP 750
RIMINI DP 1000
RIMINI DP 1200
RIMINI DP 1500
(*) The first number corresponds to the number of plastic brackets on which the emitter hangs and the
second corresponds to the metal locking bracket which fixes the emitter to the wall.
2. Place the corresponding brackets on each of the marks made, matching the lower hole.
Next, mark the upper holes of each bracket.
3. Drill all the marked locations in the wall, insert the
wall plugs, screw the brackets to the wall and hang the
emitter.
4. On the metal bracket, tighten the screw at the top until the necessary adjustment secures
the emitter.
A73021554
Dimensions (mm)
A B
160 80
240 160
320 160
400 240
560 320
No. of
brackets (*)
2 + 1
EN 55