In accordance with European Directive 2012/19/
EU and Polish legislation regarding used electrical
and electronic goods, this appliance is marked with
the symbol of the crossed-out waste container. This
marking indicates that the appliance must not be
disposed of together with other household waste
after it has been used.
The user is obliged to hand it over to waste collection
centre collecting used electrical and electronic goods. The
collectors, including local collection points, shops and local
authority departments provide recycling schemes.
Proper handling of used electrical and electronic goods helps
avoid environmental and health hazards resulting from the
presence of dangerous components and the inappropriate
storage and processing of such goods.
SPECIFICATION:
Model - JSM 4014
Rated voltage - 220-240V~, 50/60Hz
Rated power - 200 W
Power cord - 1 m
Net weight - 4.9kg
FEATURES AND COMPONENTS (FIGURE 1)
1. Lid
2. Auger
3. Juice container
4. Pulp container
5. Strainer
6. Ice cream strainer
7. Separator container
8. Cleaning brush
9. Motor unit
10. Pusher
BEFORE FIRST USE:
• Do not use the appliance continuously. If you use the
appliance for 20 minutes, turn it off and allow it to cool for
20 minutes to prevent damage to the appliance.
• If you squeeze juice from high-fibre ingredients such as
celery, etc., cut the ingredients into cubes no bigger than
3 cm wide before placing in the appliance.
• Extremely hard ingredients such as sugarcane and ginger
are not suitable for juicing.
• Make sure you remove hard stones from fruits such as
cherries, etc. It is best to peel lemons, oranges and other
fruits, and remove the seeds so that they do not affect the
taste of the juice.
• When processing harder fruit and vegetables, the
appliance will make a squeaking noise and may vibrate
slightly. This is normal and you can use the appliance with
confidence.
• Use fresh fruit and vegetables for juicing. For better result
soak fruits and vegetables stored in the refrigerator in
water for more than 10 minutes before processing.
• Processing of fruits and vegetables with darker pigments,
such as carrots, beetroots, etc. may result in a slight
discolouration on the juice containers and other parts,
which is normal.
• Before starting the appliance, make sure that the separa-
tor container lid is installed in its place.
• When adding ingredients, put them in slowly one by one
- the previously added ingredients must be processed
before adding the next portion.
ASSEMBLE THE APPLIANCE:
1. Push the valve at the bottom of the separator container.
(Fig. 2, item 1).
Note!
• The valve must be installed properly, otherwise leaks may
occur. (Fig. 2, item 2).
2. Place the separator container on the motor unit. Fit the
separator container and lock it onto the socket of the
motor unit. Press down slightly and twist until installed in
place. (Fig. 2, item 3).
• Fit the strainer in the separator container. (Fig. 2, item.
4).
EN
• Install the auger in the middle of the strainer and press it
down home. (Fig. 2, item 5).
• Install the lid of the separator container (Fig. 2, item 6).
• Align
on the lid with
the lid clockwise so that
separator container.
• Place the separator container and the pulp container (Fig.
2, item 7).
HOW TO USE YOUR APPLIANCE
1. Put washed large pieces of fruit and vegetables into the
feeder, turn the knob so that the fruit and vegetables fall
into the feeder. Put small pieces of fruit and vegetables
into the small feeder. Use the pusher to advance the
fruits.
Note!
• Use fresh fruit and vegetables for juicing. For better result
soak fruits and vegetables stored in the refrigerator in
water for more than 10 minutes before processing.
Warning!
• This appliance is not suitable for grinding grains, sugar-
cane or hard fruits.
• Remove the hard stones from fruits before juicing.
• Wash the appliance after pressing 0.5 kg of celery or
other fibrous fruit and vegetables.
2. If the appliance comes to a sudden stop, first turn the
knob to the "OFF" position and then to the reverse "R" po-
sition to have the ingredients trapped in the auger pushed
upwards. Then turn the knob to the "Juice" position to
continue operation.
Warning!
• When the appliance is in Reverse "R" mode, gently hold
the lid with your hand (to prevent the lid from coming
loose).
• If the appliance still does not operate normally, remove
the separator container and wash it thoroughly.
3. You can keep the juice outlet cap closed while juicing.
When you have squeezed all the juice, remove the cap
and pour the juice into the juice container.
Benefits:
• Reduces exposure to air and slows down the oxidation
process.
• Different fruits and vegetables can be used to obtain a
multi fruit and vegetable juice.
4. When you have finished juicing, turn the knob to the
"OFF" position and unplug the appliance power cord from
the wall outlet.
Recommendations:
• Do not store the squeezed juice for an extended time.
Product hardness valve setting:
1. Soft fruit — orange, watermelon, red grapes, pineapple,
cucumber, tomato, ice cream.
2. Hard fruit — hard fruits and fibre rich fruits and vegetables
such as apple, pear, celery, carrot, pomegranate.
DISASSEMBLE THE APPLIANCE:
1. To stop the appliance, turn the knob to the OFF position
and unplug the power cord.
2. Grasp the separator container lid by hand and turn it
counterclockwise. Turn to the position shown in Fig.
3, item 1 and lift the lid of the separator container to
disassemble.
3. Grasp the juice spout of the separator container and lift it
up to remove it (Fig. 3, item 2).
4. Remove the drive auger and filter assembly (Fig. 3, item
3).
5. Remove the drive auger from the filter (Fig. 3, item 4).
12
on the separator container. Turn
on the lid aligns with
on the