Husqvarna P 524XR EFI Manual De Usuario página 28

11. Remove the drive belt and put it in the belt holder.
12. Hold the front edge of the cutting deck with 2 hands
and pull it out.
13. Lower the cutting deck fully.
14. Open the equipment frame lock.
15. Hold the front edge of the cutting deck with 2 hands
and pull it out.
WARNING:
keep body parts away.
Remote control
For instructions for P 524XR EFI, refer to
page 26 .
28
Risk of crush injury,
Assembly on
To attach and remove the remote control
storage box
Note:
The front end of the attachment plate is on the
right side of the product. Stay in front of the attachment
plate when you attach the remote control storage box.
1. Put the remote control storage box on the adapter
plate with the front end in the direction of you.
2. Push the remote control storage box to the end
position to lock it in position.
1929 - 003 - 05.12.2023