Husqvarna P 524XR EFI Manual De Usuario página 77

Symbol
Error codes and descriptions
The error code numbers for the remote control and the
remote control receiver are shown on the information
center display.
1929 - 003 - 05.12.2023
Cause
Indicator of hydraulic oil tem-
perature and remote control
mode.
Indicator of hydraulic oil tem-
perature.
Indicator of hydraulic oil tem-
perature.
Remote control mode.
Boost function.
PTO control indicator.
Parking brake indicator.
Shows on the remote con-
trol panel
The symbols flash.
The symbol is red.
The symbol flashes
The symbol is green.
The symbol is green.
The symbol is green.
The symbol is red.
Cause/Action
The hydraulic oil tempera-
ture is below 0 °C.Operate
the product in manual mode
until sufficient heat has been
generated in the hydraulic
system.
The hydraulic oil tempera-
ture is too high.
If the problem remains,
speak to your Husqvarna
servicing dealer.
The hydraulic oil tempera-
ture is below 15 °C. The per-
formance of the product is
limited due to low hydraulic
oil temperature. Operate the
product carefully until suffi-
cient heat has been gener-
ated in the hydraulic system.
The remote control mode is
engaged.
The boost function is engag-
ed.
The drive of the cutting deck
is engaged.
The parking brake is ap-
plied.
77