Bosch GHT 130 Professional Manual Original página 9

English
Safety instructions
Read all safety and general instructions en-
closed with the Floor Removal Cart and the
hammer being used. Failure to observe the
safety and general instructions may result in
electric shock, fire and/or serious injury.
Keep all the safety and general instructions for future
reference.
Never reach inside the area of the folding
mechanism. You could injure yourself.
Wear additional personal protective equipment such
u
as protective glasses, hearing protection, a breathing
mask and safety footwear.
Ensure that the hammer is switched off before you
u
connect or disconnect the mains plug. Only connect
the mains plug for operation.
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Only fit the hammer on the trolley when the trolley is
u
positioned on a level surface. The trolley may move in
an uncontrolled manner and the hammer may fall down.
This poses a risk of injury.
Ensure that the hammer is fitted correctly and all of
u
the screws are tightened before starting work or be-
fore transporting the trolley with the hammer fitted.
Otherwise the hammer could move in an uncontrolled
manner. There is a risk of injury to you.
Before fitting the hammer to the trolley and before
u
each use of the fitted hammer, always check the
mains connection cable for any damage. When operat-
ing the fitted hammer, ensure that you do not damage
the mains connection cable. Have any damaged mains
connection cables replaced by an authorised Bosch
after-sales service centre. If a damaged mains connec-
tion cable makes contact with the trolley, it can cause an
electric shock.
Only use application tools that are permitted in the
u
operating instructions of the hammer.
Do not leave the trolley unattended when the hammer
u
is fitted and do not transport it with the hammer
switched on. Unintentional movement of the trolley can
activate the hammer's impact function.
Only use the hammer fitted on the trolley on a level
u
surface and only ever with wheels fitted on both sides.
Otherwise the trolley can fall over.
Bosch Power Tools
Ensure that the fitted hammer is stored in an upright
u
position after use. This makes the trolley more visible
and prevents potential accidents.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The Floor Removal Cart is intended for ergonomic support
when removing floor coverings like tiles, vinyl or wood with a
demolition hammer. It bears the weight of the demolition
hammer and enables a uniform working angle during floor
work.
The Floor Removal Cart may only be used with the Bosch
GSH 16-28 or the Bosch GSH 16-30.
Product Features
The numbering of the product features shown refers to the il-
lustrations of the product on the graphic pages.
(1) Lubricating nipple
(2) Trolley frame
(3) Angle adjustment unlocking lever
(4) Protective bar
(5) Handle section
(6) Cable suspension
(7) Transport wheel
(8) Handle receptacle fastening block
(9) Tool holder fastening block
(10) Top panel
(11) Splint for transport wheel
(12) Transport wheels fastening set
(13) Threaded rod with tab
(14) Bosch GSH 16-28 and Bosch GSH 16-30 fastening
set
(15) Handle section screw
(16) Handle section mounting plate
(17) Adjustment screw for angle adjustment
(18) Bowden cable lock nut
(19) Bowden cable adjustment screw
Technical Data
Floor Removal Cart
Article number
Number of possible work posi-
tions
Dimensions
– Height (highest position)
– Length (highest position)
English | 9
GHT 130
1 600 A02 WM0
5
mm 1100
mm 780
1 609 92A 8H1 | (08.09.2023)