DeWalt DWE490 Traducido De Las Instrucciones Originales página 28

EnGLIsh
LARGE ANGLE GRINDER
DWE490, DWE492, DWE492S, DWE493, DWE494
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D
e
reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Power input
No-load/rated speed
Wheel diameter
Spindle diameter
Spindle length
Weight
Noise values and/or vibration values (triax vector sum) according to EN60745:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a
h,SG
Uncertainty K =
Disc sanding
Vibration emission value a
h,DS
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
26
V
AC
V
AC
W
min
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s
m/s
= m/s
m/s
DWE490 DWE492
230 230
230/115 230/115
1 1
2000 2200
-1 6600 6600
230 230
M14 M14
19 19
5.2 5.2
94 94
104 104
3 3
2 7.1 7.1
2
2.0 2.0
2 5.0 5.0
2 1.5 1.5
EC-Declaration of Conformity
Machinery Directive
Large Angle Grinder
DWE490, DWE492, DWE492S, DWE493, DWE494
WALT declares that these products described under Technical
D
e
Data are in compliance with:
2006/42/EC, EN60745-1:2009 +A11:2010,
EN60745-2-3:2011 +A2:2013 +A11:2014 +A12:2014 +A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
WALT one of the most
e
DWE492S DWE493
230 230
– –
15 1
2200 2200
6600 8500
230 180
M14 M14
19 19
5.2 5.2
94 94
104 104
3 3
7.1 7.1
2.0 2.0
5.0 5.0
1.5 1.5
WALT.
e
DWE494
230
–
1
2200
6600
230
M14
19
5.2
94
104
3
7.1
2.0
5.0
1.5
WALT at
e