Sennheiser SK 1012-6 Modo De Empleo página 10

Recommended s ettings
Microphonebeingused
MKE2 R,MKE10,MKE10 R,MKE40 R
MKE2012, MKE4012:
transmitterhand-held
Transmittermountedon stand
Transmitterusedas lavaliermicrophone
Setting
3
1
2,5 - 3
2 - 2,5
Afterthe correctsettingof modulationput switch1 in position"ON".
111,
'
~l'
16
Attachingthe transmitter
Whenoperatingas a hand-held transmit-
ter the popand windfilter providedwith
the MKE2012and MKE4012 microphone
is alwaysto be used.The MZW
1010
pop
and windfilter is alsoavailableas an
accessory.
Whenusingas a lavaliermicrophone, t he
neckstrap providedis to be attachedto
the transmitteras shownin the illustra-
tion.Attachmentoptionsfar other uses
are alsoshownin the illustrations.
Note: It is importantfor good RF-radiation
that the antennais allowedto hangfree.
II the SK1012is to be usedprimarlyas a
hand-held microphonethe wire antenna
can be replaced with the shorter helical
antennaA4 (32 - 45 MHz)resp.A3
(138- 260 MHz). T hisantennacan be
procuredthrough your loealauthorized
Sennheiser d ealer(seeaddresslist).
~
Operatingpermit
The use of wirelessmierophone systems
is generallysubjeetto loeallieeneing or
permit arrangements. F orlurther details
eontaetyour loealSennheiser d istributor.
Special notes
Two leafletsare available on request,eon-
taining valuabletips andinformationeon-
eerningwirelesstransmission teehnology:
"Howto get the bestreception.Inter-
ference and howto copewith it."
"RF-transmission technique. W ireless
microphonesand reportersets."
17