Publicidad
Idiomas disponibles
Idiomas disponibles
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
Finish cooking
1. Turn the cooking zone off by scrolling down to
"0" or touching "-" and "+" control together.
Make sure the display shows "0".
OR
3. Beware of hot surfaces
H will show which cooking zone is hot to touch.
It will disappear when the surface has cooled
down to a safe temperature. It can also be used
as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
Using the Boost Function
Activate the boost function
1. Touching the power regulating key "+" to set
the power of the heating zone to Level 9
Cancel the Boost function
1. Touching the "-" button to cancel the Boost
function, then the cooking zone will revert to
level 9.
alternately with the heat setting
18
2. Turn the whole cooktop off by touching the
ON/OFF control.
2. Touching the power regulating key "+" again,
the zone indicator show "b" and the power
reach Max.
2. Touching "-" and "+" control together. The
cooking zone switch off and the boost function
cancel automatically.
Publicidad
