02 PREPARATION
USE OF EACH FUNCTION BUTTON
5 Control Panel Lock
Press and hold the button for 3 seconds to lock and unlock when power is turned on.
When pressing another button while the product is locked, the button indicator blinks three
times with a beep sound and the button does not operate.
When pressing and holding the
mode is deactivated and the button turns off.
If the power cord is plugged in after removed, or if the power of the product is turned on
after off by the timer, lock is deactivated automatically.
6 Filter Replacement Indicator
press and hold the
7 AQI and Light
Press the
According to the air quality, the color of AQI light changes.
- Blue: Good, Green: Moderate, Orange: Unhealthy, Purple: Very Unhealthy
In the default operation status, the button and AQI indicator are displayed in maximum
brightness on the display panel.
When pressing the button, AQI indicator, Night Light and off functions are alternately
performed.
AQI mode →Night light →All off → AQI mode
14
will pop up on the display panel when its time to replace the filter. After replacing the filter,
for 3 seconds to reset the filter replacement indicator.
button to switch between AQI and night light or to turn off the light.
button again for 3 seconds in the Lock mode, the Lock