Publicidad
Idiomas disponibles
Idiomas disponibles
|
Introduction
This colour monitor is suitable for use with
home and personal computers, video
recorders, LaserVision Players and TV
Tuners.
Especialiy for Uk
Service for you
Your monitor has been designed and
{
manufactured to the highest standards,
#
and subject to rigorous testing. Provid
is properly operated and maintained it
perform well for many years. However,
all know that in such compiex equipm
components can sometimes fail.
The legal responsibility for meeting any
in-guarantee service needs for your
monitor rests with the dealer from wh
you bought it. Our own Service Divisio
Philips Service - provides your dealer
comprehensive technical advice, and
distributes approved spare parts fro
Services Centres throughout the country.
If your dealer has no service facilities, he
can arrarıge for any work to be carried
out
by a cornpetent third party organisati
In any event you may expect speedy
attention to restore your. set to full working
order without delay.
Free service for 12 months:
j
The dealer from whom the monitor we
purchased will arrange for any defect
manufacture or material to be rectifi
without charge for a period of 12 months
from the date of initial consumer sale
provided:
4
(1) reasonable evidence is supplied that
the monitor was purchased within 1
months prior to the date of the clai
(2) the defect is not due to use of t
monitor on an incorrect voltage or
contrary to the Company's Operatin
Instructions or to accidental damage
(whether in transit or otherwise); mi$use;
neglect; unauthorised or inexpert
English
modification, or repair.
The picture tube of your monitor is
separately guaranteed for 12 months by
Philips Service.
Service after 12 months:
Continuing service after 12 months is
available in the same way but the service
will be chargeable.
These statements do not affect your
Statutory rights as a consumer.
Connection to the mains
Your new monitor is designed to operate
from an a.c. mains supply of 220-240 volts,
50 Hz. Stabilising circuits ensure
satisfactory performance within normal
supply variations.
IMPORTANT:
This apparatus must be earthed. This can
be achieved by fitting a 3 pin plug. The
wires in the earthed mains lead are
coloured according to the following code:
BLUE
= NEUTRAL
BROWN
= LIVE
GREEN/YELLOW
= EARTH
If the mains plug (or adaptor) contains a
fuse, the value of this fuse should be
3 Amp. Alternatively, if another type of
plug (not fused) is used, the fuse at the
distribution board should not be greater
than 5 Amp.
if the coiours of the wires in the mains
lead do not correspond with the coloured
markings identifying the terminals in your
plug, proceed as follows
The BLUE wire should be connected to
the terminal marked 'N' or coloured black.
The BROWN wire should be connected to
the terminal marked 'L' or coloured red.
The GREEN and YELLOW wire must be
connected to the terminal in the plug
marked by 'E' or the earth symbol +, or
coloured green or green and yellow.
Before replacing the plug cover, make
certain that the cord grip is clamped over
the sheath of the lead - not simpiy over
the three wires.
Publicidad
