Press the key
to terminate the call and the display switches off.
INTERCOM CALL
This function allows to make an intercom call to another indoor station.
It is possible to start an intercom call in 2 ways:
1.
FROM INTERCOM KEY
In this mode it is possible to make an intercom call to one contact only (indoor station) assigned to the
intercom key (for all details about the assignment method, see the Parameter configuration booklet
chapter "Assigning call key").
With video door phone in "STAND-BY" mode press key
key
to start the intercom call.
When conversation with the indoor station has been established, the LED of key
Press the key
again to terminate the call.
2.
FROM VIDEO DOOR PHONE BOOK
In this mode it is possible to make an intercom call to all contacts (indoor stations) available in the video
door phone book (for all details on how to add a contact to the video door phone book, see the Parameter
configuration booklet chapter "Video door phone book").
With video door phone in "STAND-BY" mode press key
to open the video door phone book.
The display shows the following screen page:
Only for video door configured powered in Low rise block and High rise block modes, access to
the video door phone book is permitted to one device at a time, for a maximum of 5 minutes. If a user
tries to access the book when it is already used on another device, the video door phone will emit a
dissuasion tone (4 beeps) indicating that the book cannot be displayed at the moment.
Press keys
or
call.
DS1760-048B
to select the contact in the book to be called, then press the key
, keys
and
, keys
and
will turn steady on, press
starts flashing.
turn steady on, press key
to start the
7