Publicidad
Idiomas disponibles
Idiomas disponibles
11. From the 1st attached cord, count around the jump
mat to the 16th loop and repeat steps 1-3 attaching the
2nd cord directly across from the 1st.
12. Next, count back around the jump mat & loops and
repeat steps 1 – 3 attaching the 3rd cord about half way
between the 1st & 2nd cords.
13. Then, from the 3rd attached cord, count around the
jump mat 16 loops and repeat steps 1 – 3 to attach the
4th cord. Numbers on the picture above show the ap-
proximate positions of the
8 suspension cords. Con-
tinue connecting the remaining cords as hsown in steps
1 – 3, but always connect a cord, and then switch to the
opposite side of the trampoline to connect the next cord.
Attaching the cords in this manner is important, as it will
ensure even-tension around the entire jump mat. As you
work, keep the enclosure mesh gathered to the center of
the mat
GB
9
A083a Revised 140cm Trampoline IM & add Spanish_20120807.indd 9
7/8/2012 16:04:16
Publicidad
