Publicidad
Idiomas disponibles
Idiomas disponibles
20. Locate the 6 nylon patches with grommets that are
sewn onto the top edge of the mesh. Select a nylon patch
that aligns with a pole. Carefully slip one of the patches
over the top of the enclosure pole so that the grommet is
aligned with the screw hole in the pole. Use care so that
you do not tear the mesh.
21. Insert screw & tighten. DO NOT OVER TIGHTEN. Re-
peat step 5 with the remaining 5 patches and poles. When
done properly, the enclosure mesh will be hanging on the
INSIDE of the enclosure poles. The mesh should hang
down somewhat straight and not "twist"
A083a Revised 140cm Trampoline IM & add Spanish_20120807.indd 12
GB
12
7/8/2012 16:04:22
Publicidad
