Publicidad
Idiomas disponibles
Idiomas disponibles
14. Lay the pad cover, over the suspension cords. Care-
fully position each of the 6 openings in the pad cover over
their corresponding enclosure pole sockets, as shown.
15. Repeat Step 9 with the remaining 5 grommets in the
lower mesh skirt and their corresponding legs
16. Insert the smaller diameter end of an upper enclosure
pole into the larger diameter end of a lower enclosure pole
and align screw holes. (you may need to slide the pre-
installed foam sleeves to gain access to the ends of the
poles)
A083a Revised 140cm Trampoline IM & add Spanish_20120807.indd 10
GB
10
7/8/2012 16:04:19
Publicidad
