Midea MBON5M90E5-BK Manual De Instrucciones página 17

Content that means [note]
1. Be very careful when moving or installing the appliance to avoid damage to the
appliance or damage to the cupboards.
2. Before starting up the appliance, remove all packaging materials and accessories from
the cavity.
3. The power socket shall be accessible to users (such as next to the cupboard) for easy
power-o .
4. After installation is complete, make sure that the power plug is firmly inserted into the
socket.
5. Please refer to the "Cupboard Diagram" for the requirements of net depth of the
cupboard. The clearance between the cupboard bottom board and the rear board (or
wall) shall not be less than 50 mm.
Installation Steps
1. Please customize the cupboard according to the "Cupboard Diagram".
2. Before installation, please check for normal power socket and appropriate grounding,
and check whether the cupboard dimension meets the installation requirements.
3. Place the appliance in designated locations in the kitchen, install it in a vertical
cupboard, and connect the power supply.
4. To locate the mounting fixing holes, open the appliance door and look at the side
frame of the appliance (position shown above).
5. Fix the appliance to the cupboard with two rubber plugs A and screws B provided
with the appliance.
EN-14
EN