Introduction; Features; Technical Specifications; Description - Bentel Security BGSM-I Manual De Uso

FEATURES

‡ Simulates land line
‡ Switches automatically to GSM Network in the event land line trouble (line down)
‡ Manages and signals Incoming/Outgoing calls
‡ GSM signal indicator
‡ 4 programmable OC Outputs
‡ Houses 12V - 1.2 Ah battery (not included)
‡ Tamper protection
‡ Land line overvoltage protection
‡ Dual-Band
‡ 4 Input Lines
‡ SMS Alerts
‡ Contact ID Dialler
‡ 13 SMS Messages (2 messages per Input Line and 5 Status messages)
‡ 8 phone numbers (max. 20 digits) programmable for SMS Dialler
‡ 4 phone numbers programmable for Contact ID Dialler
‡ Up to 95 phone numbers (max. 20 digits) can be programmed to manage remote control of the OC Outputs
‡ Remote control of the OC Outputs via SMS and/or over-the-phone after caller recognition
‡ Pay-As-You-Go Balance message (for pre-paid SIM Cards)

Technical Specifications

The 13.8 V (700 mA max.) power supply voltage to the BGSM-I can be drawn from the Control panel or provided by a
_
ADP1512 AC/DC adapter (accessory item).
‡ Power Supply voltage:
‡ Maximum Current Draw:
‡ Operating Temperature:
‡ Dimensions (mm):
‡ Weight (without battery):

Description

The BGSM-I GSM Interface provides total confidence in all security and surveillance applications. It manages SMS and
Central Station transmissions and can simulate the land line in the event of trouble (land line down) or even substitute the
land line completely in areas where the GSM service is provided and where the land line is not available.
The BGSM-I supports CONTACTID, 10 bps and 20 bps protocols and, in places with optimum GSM signal reception, SIA
and CESA protocols.
The performance of this device depends greatly on GSM Network cover, therefore, it should not be mounted without first
performing placement tests to determine the best location (best reception). The BGSM-I has 4 Input lines which can be used
to activate SMS and/or Contact ID transmissions (Trouble alert, Periodic messages or Pay-As-You-Go Balance for pre-paid
SIM Cards).
The BGSM-I has 4 Outputs which can be set up to control household appliances from remote locations or used for status
signalling.
Due to the characteristics of GSM Networks, the BGSM-I can function only as intended and cannot be used as a modem for
fax/data transmissions or for teleservice operations.
The BGSM-I is housed in a tamper-protected metal casing equipped with status LEDs.
The numbers in square brackets [ ] in this manual refer to the main parts of the BGSM-I (see Fig. 1) described in this section.
16

INTRODUCTION

13.8 V
_ _ _
_ _
700 mA
+5° to +40° C
138 x 224 x 55
900 g

IDENTIFICATION OF PARTS

BGSM-I z GSM Interface