Programming The Sim Card Via Pc; Viewing The Bgsm-I Settings; Downloading The Bgsm-I Settings Into The Bgsm-I; Preliminary Operations - Bentel Security BGSM-I Manual De Uso

PROGRAMMING THE SIM CARD VIA PC

This section contains the programming instructions using the BGSM-I Software Application from the Bentel Security Suite
software package. This programming method requires the connection of a Null-Modem cable (see Fig. 3) to the RS232 input
[10] of the BGSM-I and the computer COM port.
Once the Null-Modem cable has been connected, set the computer COM port through the Settings->Serial Port option from
the Menu.

Viewing the BGSM-I Settings

To view the BGSM-I settings on the screen, use the Programming->Load option from the Menu.

Downloading the BGSM-I Settings into the BGSM-I

Once programming has been completed (or an uploaded file containing existing data has been modified), download the data
into the BGSM-I, using the Programming->Download option from the Menu.

Preliminary operations

When the application starts, you will be presented with the Main window showing two sections on the left hand side.
z Folders: This section will allow you to click on the various Programming and Control Pages.
z Customers: This section will allow you to delete or retrieve configuration data, as follows:
1. Using the right button on the mouse, click on the Customer's name.
2. Click Load to upload the respective data from the Hard-Disk, or Delete to delete the data configuration.
You can load the configuration data by double clicking the respective name field.
You can list Customers in alphabetical or code order by clicking the heading of the column concerned.
, , , , , To start the configuration of a new Customer, click on File->New Customer then select the device (e.g. BGSM-I) from
the product list in the successive window.
The configuration data is presented on 4 pages, a further 2 pages (Calls and Status) are for "Supervisory and Control"
purposes. All the pages are described in detail in this section.

Telephone Page

The Telephone Page phonebook holds 95 telephone numbers.
, , , , , The first eight numbers in the phonebook will also be used for the SMS functions.

Telephone Numbers

† Description: enter an alphanumeric string of up to 20 characters.
† Number: enter a telephone number of up to 20 digits (only digits and "+" signs are accepted).
† Remote Control Numbers: select the telephone numbers which will be able to control Outputs 1, 2, 3 and 4 over the
phone. The telephone numbers cannot be selected in open order, therefore, if telephone numbers 1 and 6 are selected,
telephone numbers 2, 3, 4 and 5 will be selected automatically.
† Dial.: This memorandum column shows the SMS Dialler telephone numbers (selected on the SMS Dialler Page from
the first 8 telephone numbers in the phonebook).

Prefix

IMPORTANT: The BGSM-I will prefix the digits entered in this field to all the telephone numbers dialled through the GSM
Interface function.
If necessary enter a Prefix (maximum 4 digits) in this field. If no Prefix is required, leave this field empty.

Digit to Remove

If the BGSM-I is connected downstream to a switchboard, the telephone numbers (programmed on the Control panel) must
be preceded by the switchboard number (normally one digit). As the switchboard number is not required when calls are sent
over the GSM Network, it must be removed from the digits which form the telephone number. Enter the number of digits that
form the switchboard number (e.g. if switchboard number is 01, enter 2 in the 'Digits to remove' field, as 2 numbers form the
switchboard number).
.
Š
G G G
G G
21