5
Install the wheels
Put the front and rear wheels into
the corresponding mounting holes
of the Footwall, and install the
wheels firmly in place.
6
Install mirrors, rear wing
Place the rearview mirror and the
rear wing on the installation position
of the panel as shown in the figure.
7
Install the seat cushion
As shown in the figure, snap the
button of the seat cushion into the
buckle hole of the panel seat and
fasten it.
12
2
Assembly for anti-sliding bars
Insert five anti-sliding bars into
corresponding holes under the
bottom tray respectively . Please
make sure they are pressed to the
bottom to avoid falling-off and
rubbing the floor.
3
Install the music box
Unscrew the self-tapping screw of the battery cover
and remove the battery cover as shown in the figure,
then install the battery into the battery box (Pay
attention to the difference between "+" and "-", it
cannot be reversed),finally close the battery cover and
fix it with the self-tapping screw, press the music
button to play music.
WARNING!
1.This product use 2 AA 1.5 V batteries.
2.The battery "+" and "-" direction cannot be installed in reverse.
3.Non-rechargeable batteries are not be recharged.
4.Rechargeable batteries can only be charged under adult supervision.
5.The rechargeable battery should be removed from the toy before
charging.
6.Different types of batteries or old and new batteries can not be mixed.
7.The battery should be placed with the correct polarity.
8.Exhausted batteries should be removed from the toy.
9.Battery terminals can not be short-circuited.
Battery cannot be used as toys for children to play, so as to avoid danger.
13