Publicidad
Idiomas disponibles
Idiomas disponibles
EN
12.5 Remove oven and glass ceramic hob
Electrocution hazard
Switch off or unscrew the fuse for the cooker
power circuit.
To remove the oven:
→ Loosen all 4 fixing screws (Fig. 11)
→ Lift the oven slightly and pull it out carefully
→ Disconnect the two plugs from the hob to the oven.
ATTENTION
Appliance damage!
→ Have the glass ceramic hob removed
and repaired only by the manufacturer's
After Sales Service or by an authorised
electrician.
Once bonded to the worktop, the glass ceramic hob cannot be easily
removed again.
13 Using for the first time
Clean the oven thoroughly before the first use.
1. For good visibility in the oven; turn the function selector to
lighting; temperature remains at 0°C.
2. Remove the accessories, wash with lukewarm water and dry.
3. Heat the oven at maximum temperature for 45 minutes. As a
result, possible production residues are burnt off and the
protective film is burnt into the oven interior.
4. Let the oven cool down; wipe the oven interior with a damp
cloth to remove all residues.
ATTENTION
Risk of damage!
→ Do not use any harsh or abrasive cleaning
agents; the surface will be damaged.
Page | 48
Publicidad
