▪ When cleaning the appliance, do not use metal objects, steam systems, volatile
fluids, organic solvents or abrasive substances.
▪ Do not use sharp or pointed objects to remove ice. Use a plastic Scraper.
Important information concerning installation!
▪ To ensure proper electrical connection, follow the recommendations given in the
present manual.
▪ Unpack the appliance and visually check that it is not damaged. Do not connect a
damaged appliance. Inform your retailer or point of sale of any damage. In such a
case, keep the packaging.
▪ It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
▪ Proper air circulation is necessary to avoid overheating. To ensure sufficient
ventilation, observe the installation recommendations Provided.
▪ In order to avoid fire risk, wherever possible, ensure that the appliance is not in
contact with walls or with any hot element (compressor, condenser). Observe the
installation recommendations.
▪ The appliance should not be placed close to radiators or cooking hot plates or gas
rings.
▪ Check that electrical sockets remain accessible when the appliance is installed.
▪
When positioning the appliance, ensure the supply cord is not trapped or
damaged.
▪
Your device is not designed to be placed in a garage, basement, or similar
location.
Power saving
To limit the electricity consumption of your appliance:
▪ Install it in an appropriate place (see "Installing your appliance").
▪ Leave the doors open as little time as possible.
▪ To ensure that the appliance operates properly, clean the condenser regularly (see
"Routine servicing of your appliance").
▪ Regularly inspect the door seals and ensure that they are still closing properly. If
this is not the case, contact your after-sales service.
Layout recommendations: The following layout of your appliance's equipment (shelves, etc.)
is recommended so that energy is used as rationally as possible for the appliance.
24