Publicidad
Idiomas disponibles
Idiomas disponibles
For appliances installed in banks, an optional kit is
available with the supporting frame and some trims.
ELECTRICAL CONNECTION
Important
The connection must be made by author-
ised, skilled personnel, in accordance with
the relevant legal requirements, using ap-
propriate and specified materials. The ap-
pliance is supplied with operating voltage
400V/3~ (see attached wiring diagrams).
Caution - warning
Before doing any work, cut off the mains elec-
tricity supply.
Connect the appliance to the mains electricity sup-
ply as follows.
1 - If not already present, install a circuit-breaker (A)
with overload cutout and differential safety
breaker close to the appliance.
2 - Open the hatch (B).
3 - Undo the screws (C) and remove the control
panel (D).
4 - Undo the screws (E) to remove the guard (F).
5 - Connect the circuit-breaker (A) to the terminal
boards (G) of the appliance as shown in the di-
agram and in the electrical system diagram at
the back of the manual. Use a cable with at
least H05RN-F characteristics.
Important
When connecting, take care to connect the
earth line correctly
6 - Fix the cable with the screws (H).
7 - Replace the control panel (D) on completion of
the operation.
B
B
A
08WVT2IV
H
- 17 -
IDM-39610801100.tif
C
E
IDM-39613201000.tif
04WVT1-2IV / 08WVT1I
H
G
D
IT
GB
F
DE
FR
ES
G
English
Publicidad
