Angelo Po 04WVT1IV Manual De Uso E Instalación página 38

Important
Before it is put into service, the system must
be tested to check the operating conditions
of every single component and identify any
malfunctions. In this stage, it is important to
check that all health and safety require-
ments have been complied with in full.
To test the system, make the following checks.
The appliance's main functions do not require any
special adjustments by specialist staff except
the settings made during use by the user.
The appliance does not require the replacement of
operating components by specialist staff except the
replacement of standard parts which can be carried
IT
out by the user.
GB
DE
Important
This operation must be carried out by skilled
FR
operatives in compliance with the legal re-
quirements with regard to safety at work.
ES
Never dump non-biodegradable materials,
lubricating oils and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in accordance
with the relevant legal requirements.
English
TESTING OF THE APPLIANCE
ADJUSTMENTS
ADJUSTMENTS PROCEDURE
REPLACING PARTS
REPLACE PROCEDURE
DECOMMISSIONING THE APPLIANCE
1 - Check that the mains voltage is the same as
that of the appliance.
2 - Operate the appliance's circuit-breaker to
check the electrical connection.
3 - Check that the safety device is operating cor-
rectly.
After testing, if necessary instruct the user in all the
skills necessary for putting the appliance into oper-
ation in conditions of safety, in accordance with le-
gal requirements.
- 18 -
8
9