Publicidad
Idiomas disponibles
Idiomas disponibles
1 609 929 U32.book Seite 12 Dienstag, 12. Januar 2010 11:00 11
Warranty
For this Würth tool, we provide a warranty in
accordance with statutory /country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your
Würth sales representative or a customer service
agent for Würth compressed-air and power tools.
Disposal
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its in-
corporation into national law, power tools that are
no longer suitable for use must be separately collec-
ted and sent for recovery in an environmental-fri-
endly manner.
Noise/Vibration Information
values
determined
Measured
EN 60 745.
Typically the A-weighted noise levels of the machine
are: sound pressure level 96 dB (A); sound power
level 107 dB (A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60 745:
Drilling into metal: Vibration emission value
2
a
=2.5 m/s
, Uncertainty K=1.5 m/s
h
Impact drilling into concrete: Vibration emission val-
2
ue a
=14 m/s
, Uncertainty K=3.5 m/s
h
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of the vibrational
impact.
12
The declared vibration emission level represents the
main applications of the power tool. However if the
power tool is used for other applications, with differ-
ent accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the vibrational impact over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the op-
erator from the effects of vibration such as: Maintain
the power tool and the accessories, keep the hands
warm, organisation of work patterns.
We declare under our sole responsibility that the
product described under „Technical data" is in con-
formity with the following standards or standardiza-
tion documents: EN 60745 according to the provisi-
ons of the directives 2004/108/EC, 2006/42/EC.
09
Technical file at:
Adolf Würth GmbH & Co. KG
Künzelsau
according
to
N. Heckmann
2
,
2
.
Subject to change without notice
Declaration of Conformity
A. Kräutle
Publicidad
