Descargar Imprimir esta página

cecotec BOLERO HEXA MWO706000 LINE Manual De Instrucciones página 74

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
ENGLISH
Door handle
Glass cover
for the interior
lighting
Door gasket
Do not remove it
Stainless-steel
cover
Exterior surface
Accessories
Oven guides
Removal system
Meat probe
Note
-
Slight differences in colour in the front part of the device are caused by the use of different
materials, like glass, plastic, and metal.
-
The shadows on the door panels, which look like stripes, are due to reflections from the
interior lighting.
-
Enamel is made at very high temperatures. This can cause a slight colour variation. This is
completely normal and does not affect the appliance operation. The edges on thin trays
cannot be completely enamelled. As a result, these edges can be rough. This does not
affect the corrosion protection.
-
Always keep the device clean and immediately remove the dirt so that the appliance does
not accumulate lasting dirt residues.
74
BOLERO HEXA MWO706000 LINE
Hot water with soap:
Wipe it with a kitchen cloth and then dry it with a soft cloth.
If water softener comes into contact with the door handle, immediately
clean it. Otherwise, you will not be able to remove the stains.
Hot water with soap:
Wipe it with a kitchen cloth and then dry it with a soft cloth.
If the interior is very dirty, use an oven cleaner.
Hot water with soap:
Clean it with a kitchen cloth. Do not rub the gasket.
Stainless steel cleaner:
Follow the manufacturer instructions. Do not use special products for
stainless steel. Remove the door cover to clean it.
Cleaning
Hot water with soap:
Immerse them in water and clean them with a kitchen cloth or a brush.
If there are large dirt remains, use a stainless-steel scouring pad.
Hot water with soap:
Immerse them in water and clean them with a kitchen cloth or a brush.
Hot water with soap:
Clean it with a kitchen cloth or brush.
Do not remove lubricant while the removal guides are spread out. The
best solution is to clean the system when the guides are not spread out.
Do not wash it in the dishwasher.
Hot water with soap:
Clean it with a kitchen cloth or brush. Do not wash it in the dishwasher.

Publicidad

loading

Este manual también es adecuado para:

02835