Kohler K-2333 Guia De Instalacion página 6

Countertop
Lavatory
Apply a bead of Silicone
Washer
Sealant 1/8" (3mm) to
the outside of the stud
Nut
holes.
6. Position the Lavatory
CAUTION: Risk of personal injury or product damage. This
lavatory is very heavy. Two people should lift the lavatory into place.
CAUTION: Risk of product damage. When lifting the lavatory into
place, do not bump the studs against solid objects. Do not support the
lavatory on the studs at any time.
- Place a continuous bead of silicone sealant on the countertop 1/8"
(3mm) from the outside edge of the stud holes.
- Position the lavatory on the countertop. Each stud should go
through one of the four previously drilled holes.
- Press down firmly.
CAUTION: Risk of product damage. Do not tighten the nuts more
than 1/2 turn past hand tight. Damage to the lavatory may result.
- Thread a washer and nut onto each of the studs from underneath the
countertop. Tighten the nuts 1/2 turn past hand tight.
- Wipe away any excess sealant.
7. Install the Drain
- Install the drain to the lavatory according to the drain
manufacturer's instructions.
- Finish the faucet installation and check for leaks.
B
1023121-2-
Nut
Stud
6
Gasket
Nut
Gasket
Kohler Co.