SPECIFICATIONS/OPTIONAL ACCESSOIES
PEDESTAL iNSTALLATiON
The pedestal
accessory
includes:
= Drawer divider (1)
= Wrench (1)
• Screws (18) 1-
• Retainers (4) 1-1-
1 Dryer installation
only uses 8 screws
1"1- For dryer only
J
TOOLS Needed
for Installation:
= Phillips-head screwdriver
Wrench (supplied)
__
To ensure safe and secure installation, please
thoroughly follow the instructions
below.
WARN|NG
= incorrect
installation can cause serious
accidents.
= The appliances
are heavy. Two or more
people are required when installing the
pedestal.
There is a risk of serious back injury
or other injuries.
• Do not allow children
to play in or on the
drawer. There is a risk of suffocation or injury.
Do not step on the handle. There is a risk of
serious injury.
• If appliances
are already installed,
disconnect
them from all power, water, or
gas lines and from draining
or venting
connections.
Failure to do so can result in
electrical shock, fire, explosion, or death.
When installing, gloves must be put on.
Retract fully
Then loosen
1-1/2 turns
To set the dryer to the same height as the
washer, fully retract the leveling feet of the
dryer by turning them counterclockwise,
then
turn them clockwise 1-1/2 turns.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
, T-clip
\
Retainer
Insert the T-clip of the 4 retainers into the
dryer base as shown. Press up on the
back of the clip and pull outward to lock
into place.
57